Husqvarna QW36S114 User Manual
• This appliance is intended to be used in householdand similar applications such as:– staff kitchen areas in shops, offices and otherworking environments;– by clients in hotels, motels, bed & breakfast andother residential type environments;– areas for communal use in blocks of flats or inlaunderettes.• The appliance maximum load is 10 kg. Do not exceedthe maximum load of each programme (refer to the“Programmes” chapter).• The operating water pressure at the water entry pointfrom the outlet connection must be between 0.5 bar(0.05 MPa) and 8 bar (0.8 MPa).• The ventilation opening in the base must not becovered by a carpet, mat, or any floor covering.• The appliance must be connected to the water mainsusing the new supplied hose sets, or other new hosesets supplied by the Authorised Service Centre.• Old hose sets must not be reused.• If the mains power supply cable is damaged, it mustbe replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoidan electrical hazard.• Before any maintenance operation, deactivate theappliance and disconnect the mains plug from thesocket.• Do not use high pressure water sprays and/or steamto clean the appliance.• Clean the appliance with a moist cloth. Use onlyneutral detergents. Do not use abrasive products,abrasive cleaning pads, solvents or metal objects.2. SAFETY INSTRUCTIONS2.1 InstallationThe installation must complywith relevant nationalregulations.• Remove all the packaging and thetransit bolts including rubber bushwith plastic spacer.• Keep the transit bolts in a safe place.If the appliance is to be moved in thewww.husqvarna-electrolux.se4 |
Related manuals for Husqvarna QW36S114
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved