Husqvarna QW 147273 User Manual
Problem Possible solutionThe appliance does notfill with water and drainimmediately.Make sure that the drain hose is in the correct position. Thehose may be too low.The appliance does notdrain the water.Make sure that the sink spigot is not clogged.Make sure that the drain hose has no kinks or bends.Make sure that the drain filter is not clogged. Clean the filter, ifnecessary. Refer to 'Care and cleaning'.Make sure that the connection of the drain hose is correct.Set the drain programme if you set a programme without drainphase.Set the drain programme if you set an option which ends withwater in the tub.The spin phase does notoperate or the washingcycle lasts longer thanusually.Set the spin programme.Make sure that the drain filter is not clogged. Clean the filter, ifnecessary. Refer to 'Care and cleaning'.Adjust manually the items in the tub and start the spin phaseagain. This problem may be caused by balance problems.There is water on thefloor.Make sure that the couplings of the water hoses are tight andthere is not water leakages.Make sure that the drain hose have no damages.Make sure you use the correct detergent and the correct quan-tity of it.You cannot open the ap-pliance door.Make sure that the washing programme is finished.Set the drain or the spin programme if there is water in thedrum.Make sure that the appliance receives electrical power.This problem may be caused by a failure of the appliance.Contact the Authorised Service Centre.The appliance makes anunusual noise.Make sure the levelling of the appliance is correct. Refer to 'In-stallation'.Make sure that the packaging and/or the transit bolts are re-moved. Refer to 'Installation'.ENGLISH 25 |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved