Menu
Husqvarna QR2645WQR2645XQR2640W User Manual
                    | |
Problem Possible cause SolutionAudible or visual alarm is on. The cabinet has been re-cently switched on or thetemperature is still toohigh.Refer to "Door Open Alarm"or"High Temperature Alarm".The temperature in the ap-pliance is too high.Refer to "Door Open Alarm"or"High Temperature Alarm".The door is left open. Close the door.The temperature in the ap-pliance is too high.Contact a qualified electricianor contact the nearest Author-ized Service Centre.A rectangular symbol isshown instead of numberson the Temperature Display.Temperature sensor prob-lem.Contact the nearest Author-ized Service Centre (the cool-ing system will continue tokeep food products cold, buttemperature adjustment willnot be possible).The lamp does not work. The lamp is in stand-by. Close and open the door.The lamp does not work. The lamp is defective. Contact the nearest Author-ized Service Centre.The compressor operatescontinually.Temperature is set incor-rectly.Refer to "Operation" chapter.Many food products wereput in at the same time.Wait some hours and thencheck the temperature again.The room temperature istoo high.Refer to climate class chart onthe rating plate.Food products placed inthe appliance were toowarm.Allow food products to cool toroom temperature before stor-ing.The door is not closed cor-rectly.Refer to "Closing the door".The COOLMATIC functionis switched on.Refer to "COOLMATIC func-tion".The compressor does notstart immediately afterpressing the COOLMATIC,or after changing the tem-perature.This is normal, no error hasoccurred.The compressor starts after aperiod of time.Water flows inside the refrig-erator.The water outlet is clog-ged.Clean the water outlet.www.husqvarna-electrolux.se12 |
Related manuals for Husqvarna QR2640X
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved