Husqvarna PP 325 E Operator's Manual

Also see for PP 325 E: Operator's manual Owner's/operator's manual Operator's manual

8 – EnglishASSEMBLING AND ADJUSTMENTSCheck the oil levelThe power pack is supplied with 12 litres of hydraulic oil 466cSt HSH of a well-known brand. The oil is an environmentallyadapted and SP approved ester oil that will drastically reducethe risk of allergic reaction or skin irritation upon contact. Inaddition, the oil is quickly degradable in case of unintentionalrelease.• Check the hydraulic fluid level in the power unit. This ischecked with the level indicator.Min. level = red lineMax. level = black lineDo not exceed the max. level when filling the tank withhydraulic fluid. The hydraulic fluid expands when it gets hotand can overflow if the level is too high. Tank volume 12 l (3.2US gallons).Check the air pressure in the tyres• Check the air pressure in the tyres. This should be 2 bar.Connect the hydraulic hoses.• The couplings should be wiped clean to reduce the risk ofleakage before the hoses are fitted.• The couplings are locked by turning the outer sleeve onthe female coupling so that the slot moves away from theball.Hydraulic hose, return IN (B)Hydraulic hose, pressure OUT (A)Connect the water cooling• Connect a water hose between the upper coolingconnection on the hydraulic oil tank and the working tool,and also a hose from the closest hydrant via a tap to thelower cooling connection on the tank.• If no tool requiring water is used, just let the cooling waterflow to the closest floor drain.