Menu
Husqvarna LX 95 Operator's Manual
                    |
4. Remove the 4 nuts and the 4 washers from thevibration damping units (B).BC5. Remove the 3 screws and the 3 washers (C).6. Remove the product (D) from the ground plate.DE7. Remove the 4 vibration damping units (E).8. Install the vibration damping units in oppositesequence.Transportation, storage and disposalTransportationWARNING: Be careful during transportation.The product is heavy and can cause injuryor damage if it falls or moves duringtransportation.Lift the product to move it shorter distances. For longerdistances, put the product on a transportation vehicle.CAUTION: Do not tow the product behind avehicle.To lift the productWARNING: Make sure that the liftingequipment has the correct specification to liftthe product safely. The type plate on theproduct shows the product weight.WARNING: Do not walk or stay below ornear a lifted product.• Attach the lifting equipment at the lifting point of thesafety frame. A label on the product identifies thecorrect position.BABWARNING: Do not use metal hooks,chains or other lifting equipment withrough edges that can cause damage tothe lifting point.WARNING: Do not lift a damagedproduct. Make sure that the safety frame14 1652 - 001 - 03.05.2021 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved