Husqvarna K1270 II R Operator's Manual

Technical dataTechnical dataCylinder displacement, cu.in./cm3 7.3/119Cylinder bore, in./mm 2.4/60Travel length, in./mm 1.7/42Idle speed, rpm 2700Wide open throttle, no load, rpm 9300 (+/- 150)Power, hp/kW @rpm 7.9/5.8 @8400Spark plug NGK BPMR 7AElectrode gap, in./mm 0.02/0.5Fuel tank capacity, US fl oz/liters 40/1.2Weight, Power cutter without fuel and cutting blade 14in.(350mm), Ib/kg22.4/10.2Noise emissions 1Sound power level, measured dB (A) 116Sound power level, guaranteed LWAdB (A) 117Sound levels 2Equivalent sound pressure level at the ear of the operator,dB (A)104Noise declaration statementThese declared values were obtained by laboratorytype testing in accordance with the stated directive orstandards and are suitable for comparison with thedeclared values of other products tested in accordancewith the same directive or standards. These declaredvalues are not suitable for use in risk assessmentsand values measured in individual work places maybe higher. The actual exposure values and risk ofharm experienced by an individual user are unique anddepend upon the way the user works, in what materialthe product is used, as well as upon the exposure timeand the physical condition of the user, and the conditionof the product.1 Noise emissions in the environment are measured as sound power (LWA) in conformity with directive2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed soundpower includes dispersion in the measured result and variations between different units of the same productaccording to directive 2000/14/EC.2 Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy totalfor different sound pressure levels in various working conditions. Reported data for equivalent sound pressurelevel for the product has a typical statistical dispersion (standard deviation) of 1 dB (A).1390 - 001 - 10.01.2020 21