Husqvarna HUV4210 2005 Series Maintenance Service Manual

BODY AND TRIM Front Body2005-2006 HUV4210-G, 4210-E, 4210-GXP, 4210-EXP Maintenance and Service Manual Page 4-34TOUCH-UP PAINT COLOR CHARTFRONT BODYSee General Warning, Section 1, Page 1-1.BUMPER REMOVAL1. Remove bolts (3) and (5) and lock nuts (4) and pull bumper (1) from vehicle frame (Figure 4-1,Page 4-3). See following WARNING.ý WARNING• Have another person hold bumper firmly against the frame when removing the last bolt. Thebumper weighs approximately 40 pounds. Hold the bumper securely during removal to avoidpersonal injury.BUMPER INSTALLATION1. Position bumper against body and front frame and loosely install top bolts and lock nuts. See followingWARNING.ý WARNING• Have another person hold bumper firmly when installing first bolt. The bumper weighsapproximately 40 pounds. Hold the bumper securely during installation to avoid personalinjury.2. Install bottom bolts and lock nuts. Tighten hardware to 17.5 ft-lb (24 N·m).3. Tighten top hardware to X17.5 ft-lb (24 N·m).COLOR HUSQVARNA P/NHusqvarna Orange Husqvarna 603 00 33-29Figure 4-1 Front Bumper Figure 4-2 Front Brush Guard3 5 41TYPICAL4 PLACESTYPICAL4 PLACES35 42TYPICAL4 PLACESTYPICAL4 PLACES

/ 60

Related manuals for Husqvarna HUV4210 2005 Series

Husqvarna HUV 4214 2009 Maintenance And Service Manual

This manual is suitable for:

HUV4210 2005 Series HUV4210 2006 Series HUV4210-E 2005 HUV4210-E 2006 HUV4210-EXP 2005 HUV4210-EXP 2006 HUV4210-G 2005 HUV4210-G 2006 HUV4210-GXP 2005 HUV4210-GXP 2006

Husqvarna HUV4210 2005 Series Maintenance Service Manual

Product

Learn More

Legal