Husqvarna DM 200 Operator's Manual

Also see for DM 200: Operator's manual Workshop manual

19. Operator's manualSymbols on the product(Fig. 2) WARNING! This product can be dangerousand cause serious injury or death to theoperator or others. Be careful and use theproduct correctly.(Fig. 3) Read the operator's manual carefully andmake sure that you understand theinstructions before you use this product.(Fig. 4) Always use approved personal protectiveequipment. Refer toPersonal protectiveequipment on page 9.(Fig. 5) This product complies with applicable ECdirectives.(Fig. 6) Environmental mark. The product orpackage of the product is not domesticwaste. Recycle it at an approved disposallocation for electrical and electronicequipment.Note: Other symbols/decals on the product refer tospecial certification requirements for some markets.Product liabilityAs referred to in the product liability laws, we are notliable for damages that our product causes if:• the product is incorrectly repaired.• the product is repaired with parts that are not fromthe manufacturer or not approved by themanufacturer.• the product has an accessory that is not from themanufacturer or not approved by the manufacturer.• the product is not repaired at an approved servicecenter or by an approved authority.SafetySafety definitionsWarnings, cautions and notes are used to point outspecially important parts of the manual.WARNING: Used if there is a risk of injury ordeath for the operator or bystanders if theinstructions in the manual are not obeyed.CAUTION: Used if there is a risk of damageto the product, other materials or theadjacent area if the instructions in themanual are not obeyed.Note: Used to give more information that is necessary ina given situation.General power tool safety warningsWARNING: Read all safety warnings,instructions, illustrations and specificationsprovided with this power tool. Failure tofollow all instructions listed below may resultin electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety• Keep work area clean and well lit. Cluttered or darkareas invite accidents.• Do not operate power tools in explosiveatmospheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.• Keep children and bystanders away while operatinga power tool. Distractions can cause you to losecontrol.Electrical safety• Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use any adapterplugs with earthed (grounded) power tools.Unmodified plugs and matching outlets will reducerisk of electric shock.• Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of electricshock if your body is earthed or grounded.• Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the risk ofelectric shock.• Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool. Keepcord away from heat, oil, sharp edges or movingparts. Damaged or entangled cords increase the riskof electric shock.• When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use of acord suitable for outdoor use reduces the risk ofelectric shock.• If operating a power tool in a damp location isunavoidable, use a residual current device (RCD)protected supply. Use of a RCD reduces the risk ofelectric shock.Personal safety• Stay alert, watch what you are doing and usecommon sense when operating a power tool. Do not6 1416 - 004 - 02.07.2020