Husqvarna DC 6000 Operator's Manual

Also see for DC 6000: Operator's manual Operator's manual Workshop manual

ContentsIntroduction................................................................... 76Safety............................................................................78Assembly...................................................................... 82Operation...................................................................... 82Maintenance................................................................. 85Troubleshooting............................................................ 94Transportation, storage and disposal........................... 95Technical data.............................................................. 97Declaration of Conformity............................................. 99IntroductionProduct descriptionThe product is a dust extractor with a suction hose. Airwith dust is suctioned into an inlet valve through thesuction hose. The air decreases in speed by a cyclonewhich cause the dust particles to move apart from theair. Small dust particles and air goes through a 2 filtersystem. Large dust particles are collected in the cycloneand fall through the bottom flap into a plastic bag.Intended useThe product is used to clean construction areas bycollecting up dry and non flammable dust in indoorenvironments.The product can be connected to medium and largesurface preparation equipment such as grinders.The product is intended for commercial use, for examplein hotels, schools, hospitals, factories, shops, officesand rental businessesNote: The explosion limit value for the not flammabledust is >0.1mg/m3.Dust storage systemAll Husqvarna DC 6000s are to be used with Longopac.Only change Longopac after the filter cleaning cycle hasbeen completed.76 1883 - 001 - 01.06.2022