Husqvarna BS 75 Operator's Manual

To replace the bladeWARNING: Use protective gloves withKevlar. The blades are very sharp.1. Lift the front of the product and put a support belowthe product. Make sure that the blade is lifted fromthe floor.2. Loosen the 3 screws on the tool holder.3. Remove the blade.4. Push the new blade into the tool holder.5. Make sure that the blade is in the correct position.6. Tighten the 3 screws on the tool holder.To sharpen the bladeWARNING: Use protective gloves withKevlar. The blades are very sharp.1. Lift the front of the product and put a support belowthe product. Make sure that the blade is lifted fromthe floor.2. Sharpen the blade with an angle grinder. Use agrinding disc with a grit of 120.WARNING: Make sure that thegrinding disc does not catch the edge orcorner of the blade.a) Grind the top edge of the blade for bevel up.b) Grind the bottom edge of the blade for beveldown.1804 - 003 - 28.08.2023 19