Husqvarna BLi100 Operator's Manual

Also see for BLi100: Operator's manual Operator's manual Workshop manual

Symptoms Cause ActionThe battery error LED comes on. Cell difference too much (1V). Speak to your dealer.TRANSPORTATION AND STORAGE• The supplied Li-ion batteries obey the Dangerous Goods Legislationrequirements.• Obey the special requirement on package and labels for commercialtransportations, also those from third parties and forwarding agents.• Speak to a person with special training in dangerous material beforeyou send the product. Obey all applicable national regulations.• Use tape on the contacts when you put the battery in a package. Putthe battery in the package tightly to prevent damage and accidents.• Do not keep the battery in an area where static electricity can occur. Donot keep the battery in a metal box.• Put the battery in a dry, frost free and clean space with correcttemperature.• Put the battery in storage where the temperature is between 5 °C (41°F) and 25 °C (77 °F). Keep the battery away from sunlight.• Charge the battery 30% to 50% before you put it in storage for longperiods.• Clean the battery before you put it in storage.DISPOSALHusqvarna products are not domestic waste and must only be discarded asgiven in this manual.• Obey the local disposal requirements and applicable regulations.• Recycle the product and package at an applicable disposal location.• Speak to your local Husqvarna dealer for more information on how torecycle and discard the product.TECHNICAL DATAFor technical data, refer to the rating plate of the battery.6 1243 - 003 - 26.03.2020