Husqvarna AUTOMOWER FlexiFence Operator's Manual

OperationTo charge the batteryCharge the battery fully before you start the product for the first time. Thebattery is fully charged when the LED indicator is constant orange. Theproduct does not operate while it charges.1. Remove the cover of the product.2. Remove the sealing cap of the product.3. Connect the USB-C charging cable into the charging socket.4. Connect the USB-A charging cable into a power supply unit.5. Connect the power supply unit to a power outlet.6. Examine if the LED indicator on the product flashes orange to make surethat the battery charges.Note: The 5 V power supply unit with USB socket is not included.Note: If the product is not used for a long time, charge the battery toa minimum of 60% each 3 months. Charge the battery of the product to aminimum of 60% before you start the product after long-term storage.LED indicator of the battery capacityThe LED indicator comes on when the battery state of charge of the product isless than 10%. To show the LED indicator when the battery state of charge ismore than 10%, push the ON/OFF button for 5 seconds.Light CauseGreen solid LED The product is on and the battery state of charge ismore than 30%.Green LED flashesslowlyThe product is on and the battery state of charge is10-30%.10 1685 - 004 - 26.10.2022