Husqvarna AUTOMOWER 420 Operator's Manual

Also see for AUTOMOWER 420: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

1 Introduction1.1 IntroductionSerial number:PIN code:The serial number is on the product rating plate and on the product carton.• Use the serial number to register your product on www.husqvarna.com.1.1.1 SupportFor support about the product, speak to your Husqvarnaservicing dealer.1.1.2 Product descriptionNote: Husqvarna regularly updates the appearanceand function of the products. Refer toSupport on page3.The product is a robotic lawn mower. The product has abattery power source and cuts the grass automatically. Itcontinuously alternates between mowing and charging.The movement pattern is random, which means that thelawn is mowed evenly and with less wear. The boundarywire and the guide wire controls the movement of theproduct within the work area. Sensors in the productsenses when it is approaching the boundary wire. Thefront of the product always passes the boundary wire bya specific distance before the product turns around.When the product hits an obstacle or approaches theboundary wire the product selects a new direction.The operator selects the operation settings with the keyson the keypad. The display shows the selected andpossible operation settings, and the operation mode ofthe product.1.1.2.1 Mowing techniqueThe product is emission free, easy to use and savesenergy. The frequent cutting technique improves thegrass quality and decreases the use of fertilizers.Collection of grass is not necessary.1.1.2.2 Find the charging stationThe product operates until the battery state of charge islow. Then it follows the guide wire to the chargingstation. The guide wire is laid from the charging stationtowards, for instance, a remote part of the work area orthrough a narrow passage. The guide wire is connectedwith the boundary wire and makes it much easier andfaster for the product to find the charging station.1.1.2.3 Automower® ConnectAutomower® Connect is a mobile application that makesit possible to select the operation settings remotely.Refer toAutomower® Connect app on page 23.1201 - 005 - 19.03.2021 Introduction - 3