Husqvarna 97045880101 Operator's Manual

26LUBR ICATION12/12 Each year Lubricate with grease gun1/52 Each Week Filter change1/365 Each day Oil changeLevel checkGeneralRemove the ignition key to prevent accidentalmovements during lubrication.When lubricating with an oil can, it must be filledwith engine oil. When lubricating with grease,unless otherwise stated, use a high grademolybdenum disulphide grease.For daily use, the machine must be lubricatedtwice weekly. Clean away unwanted grease afterlubrication.It is important to avoid getting lubricant on thebelts or the drive surfaces of the belt pulleys.If this occurs, try to clean them with spirits. Ifthe belt continues to slip after cleaning, the beltmust be replaced. Gasoline or other petroleumproducts must not be used to clean belts.IMPORTANT INFORMATION Use minimallubrication and remove unwanted lubricant soit does not come into contact with belts or beltpulley drive surfaces.WARNING! Escaping hydraulic oil underpressure can have sufficient force to penetratethe skin, causing dangerous injury. If injuredby escaping fluid, see a doctor immediately. Ifcorrect medical treatment is not administered itcan cause a dangerous infection or reaction.