Husqvarna 970 55 16-02 Operator's Manual

Also see for 525iLK: Operator's manual

BAC1. Make sure that the power trigger is locked when thelock is in its original position.2. Push the power trigger lockout forward (A) anddown. Hold the power trigger lockout against thehandle (B) and make sure that it returns to itsoriginal position when you release it.BA3. Make sure that the power trigger and the powertrigger lockout moves freely and that the returnsprings operate properly.4. Start the product, refer toTo start the product onpage 12.5. Push the power trigger fully to apply full speed.6. Release the power trigger and make sure that thecutting attachment stops and remains still.Safety instructions for assemblyWARNING: Read this power unitmanual together with approved accessorymanual.• Remove the battery from the product before youassemble the product.• Use approved protective gloves.• A defective or incorrect guard can cause injury. Donot use a cutting attachment that does not have anapproved guard attached.• Make sure that you assemble the cover and shaftcorrect before you start the product.• If a harness is supplied with the attachment, theharness must be correctly attached to the product.The harness makes operation safe and preventsinjury to the operator or other persons.Safety instructions for maintenanceWARNING: Read the warninginstructions that follow before you domaintenance on the product.• Remove the battery before you do maintenance,other checks or assemble the product.• The operator must only do the maintenance andservicing shown in this operator's manual. Turn toyour servicing dealer for maintenance and servicingof a larger extension.• Do not clean the battery or the battery charger withwater. Strong detergent can cause damage to theplastic.• If you do not do maintenance, it decreases thelife cycle of the product and increases the risk ofaccidents.• Special training is necessary for all servicing andrepair work, especially for the safety devices on theproduct. If not all checks in this operator's manualare approved after you have done maintenance, turnto your servicing dealer. We guarantee that there areprofessional repairs and servicing available for yourproduct.• Only use original spare parts.• Always use heavy duty gloves when you repair thecutting attachment. The blades are very sharp andcan easily cause injuries.1846 - 003 - 24.02.2023 9