Husqvarna 970 49 46-04 Operator's Manual

MACHINE´S SAFETY EQUIPMENTEnglish – 7GeneralThis section describes the machine′ s safety equipment,its purpose, and how checks and maintenance should becarried out to ensure that it operates correctly.Stop/run switchThe star t/stop knob is used to start and stop the machine.Checking the stop/run switchCheck that the emergency stop or machine stop buttonare not pressed by turning them clockwise.• Reduce the pressure between grinding disc and floorby pushing down the handle without lifting the grindingunit from the floor when starting.• Start the machine by turning the 0/1 knob to position1 (drive). The machine will then start smoothly andaccelerate to the set speed within 5 seconds.• Turn the start/stop knob to ”0” (stop) to stop themachine.Emergency stopThe emergency stop is used to quickly switch off theengine. The emergency stop at the machine breaks themains power supply.Testing the emergency stop• Press the emergency stop. Check that the enginestops.• Disengage Emergency Stop button (twist clockwise).! WARNING! Never use a machine withfaulty safety equipment. The machine’ssafety equipment must be checked andmaintained as described in this section.If your machine fails any of these checkscontact your service agent to get itrepaired.CAUTION! Connect the motor cable to the electrical boxbefore connecting the plug.~1 mm1 21 2