Husqvarna 445 Rancher Operator's Manual

Also see for 445: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Transportation and storageTransportation and storage• For storage and transportation of the product andfuel, make sure that there are no leaks or fumes.Sparks or open flames, for example from electricaldevices or boilers, can start a fire.• Always use approved containers for storage andtransportation of fuel.• Empty the fuel and chain oil tanks beforetransportation or before long-term storage. Discardthe fuel and chain oil at an applicable disposallocation.• Use the transportation guard on the product toprevent injuries or damage to the product. A sawchain that does not move can also cause seriousinjuries.• Remove the spark plug cap from the spark plug andengage the chain brake.• Attach the product safely during transportation.To prepare your product for long-termstorage1. Stop the product and let it become cool before youdisassemble it.2. Disassemble and clean the saw chain and thegroove in the guide bar.CAUTION: If the saw chain andguide bar are not cleaned, they canbecome rigid or blocked.3. Attach the transportation guard.4. Clean the product. Refer toMaintenance on page 21for instructions.5. Do a complete servicing of the product.Technical dataTechnical data445 450 RancherEngineCylinder displacement, cu.in/cm3 2.79/45.7 3.06/50.2Idle speed, rpm 2500-2700 2500-2700Maximum engine power acc. to ISO8893, kW/hp@rpm 2.1/2.8@9000 2.4/3.2@9000Ignition systemSpark plug NGK BPMR 7A/ Champion RCJ 7Y/Husqvarna HQT-1/HusqvarnaHQT-1RNGK BPMR 7A/ Champion RCJ 7Y/Husqvarna HQT-1/HusqvarnaHQT-1RElectrode gap, inch/mm 0.02/0.5 0.02/0.5Fuel and lubrication systemFuel tank capacity, US pint/l 0.95/0.45 0.95/0.45Oil tank capacity, US pint/l 0.55/0.26 0.55/0.26Type of oil pump Automatic AutomaticWeightWeight, lb/kg 11.2/5.1 11.2/5.1Saw chain/guide barRecommended bar lengths, inch/cm 13-20/33-51 13-20/33-511286 - 007 - 21.06.2021 29