KEY TO SYMBOLS2 – EnglishSymbolsWARNING! Clearing saws,brushcutters and trimmers can bedangerous! Careless or incorrectuse can result in serious or fatalinjury to the operator or others.Please read the operator’s manualcarefully and make sure youunderstand the instructions beforeusing the machine.Always wear:• A protective helmet where thereis a risk of falling objects• Approved hearing protection• Approved eye protectionMax. speed of output shaft, rpmThis product is in accordance withapplicable EC directives.Watch out for thrown objects andricochets.The operator of the machine mustensure, while working, that nopersons or animals come closer than15 metres.Machines fitted with saw blades orgrass blades can be thrown violentlyto the side when the blade comesinto contact with a fixed object. Theblade is capable of amputating anarm or leg. Always keep people andanimals at least 15 metres from the machine.Arrows which show limits for handlepositioning.Always wear approved protectivegloves.Wear sturdy, non-slip boots.Only use non-metallic, flexiblecutting attachments, i.e. trimmerheads with trimmer cord.Noise emission to the environmentaccording to the EuropeanCommunity’s Directive. Themachine’s emission is specified inchapter Technical data and on label.Starting instructionsOther symbols/decals on themachine refer to special certificationrequirements for certain markets.The engine is switched off by movingthe stop switch to the stop position.CAUTION! The stop switchautomatically returns to the startposition. In order to preventunintentional starting, the spark plugcap must be removed from the spark plug whenassembling, checking and/or performing maintenance.Always wear approved protectivegloves.Regular cleaning is required.Visual check.Approved eye protection must alwaysbe used.50FT15 m50FT15 m1.2.3.4.