Husqvarna 323LD Operator's Manual

Also see for 326C, 326L, 326LX-Series, 326LDX-Series: Operator's manual Operator's manual Operator's manual Owner's manual Operator's manual

English – 25TECHNICAL DATANote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under variousworking conditions with the following time distribution: 1/2 idling and 1/2 max speed.NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cuttingattachments for the machine. The table indicates the lowest and highest values.Technical data 325Cx 325Lx 325LDxEngineCylinder displacement, cm3 24,5 24,5 24,5Cylinder bore, mm 34,0 34,0 34,0Stroke, mm 27 27 27Idle speed, rpm 2700 2700 2700Recommended max. fast idle speed, rpm 11000-11700 11000-11700 10000-10500Speed of output shaft, rpm 11700 8014 8014Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/9000 0,9/9000 0,9/9000Catalytic converter muffler Yes Yes YesSpeed-regulated ignition system No No YesIgnition systemManufacturer/type of ignition system Walbro MB Walbro MB Walbro MBSpark plug Champion RCJ 7Y Champion RCJ 7Y Champion RCJ 7YElectrode gap, mm 0,5 0,5 0,5Fuel and lubrication systemManufacturer/type of carburettor Zama C1Q Zama C1Q Zama C1QFuel tank capacity, litre 0,5 0,5 0,5WeightWeight without fuel, cutting attachment and guard, kg 4,2 4,1 4,4Noise emissions(see note 1)Sound power level, measured dB(A) 107 108 108Sound power level, guaranteed LWA dB(A) 109 110 110Noise levels(see note 2)Equivalent noise pressure level at the operator’s ear,measured according to EN/ISO 11806 and ISO 7917,dB(A), min./max.:92/97 92/98 90/98Vibration levelsVibration levels at handles, measured according to EN/ISO 11806 and ISO 7916, m/s2At idle, left/right handles, min.: 3,6/3,2 1,5/1,4 1,5/1,4At idle, left/right handles, max.: 3,7/3,3 2,0/1,8 2,4/2,2At max. speed, left/right handles, min.: 2,6/5,2 2,5/4,8 2,5/4,8At max. speed, left/right handles, max.: 3,5/5,6 4,9/8,0 5,8/7,6