Husqvarna 323C Operator's Manual

Also see for 325L X Series: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

24 – EnglishTECHNICAL DATANote 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under variousworking conditions with the following time distribution: 1/2 idle and 1/2 max. speed.NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cuttingequipment fitted. The table indicates the highest and lowest values.Technical data 325Lx 325LDxEngineCylinder volume, cu.in/cm3 1,50/24,5 1,50/24,5Cylinder bore, inch/mm 1,34/34 1,34/34Stroke, inch/mm 1,06/27 1,06/27Idle speed, rpm 2700 2700Recommended max. speed, rpm 11000-11700 10000-10500Speed of output shaft, rpm 8014 8014Max. engine output, acc. to ISO 8893, kW/ r/min 0,9/9000 0,9/9000Catalytic converter muffler Yes YesSpeed-regulated ignition system No YesIgnition systemManufacturer/type of ignition system WalbroMB/SEMAM49WalbroMB/SEMAM49Spark plug Champion RCJ 7Y Champion RCJ 7YElectrode gap, inch/mm 0,02/0,5 0,02/0,5Fuel and lubrication systemManufacturer/type of carburettor Zama C1Q Zama C1QFuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5WeightWeight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1 9,7/4,4Sound levels(see note 1)Equivalent sound pressure level at the user′s ear,measured according to ANSI B175.3-1997, dB(A), min/max:92/98 90/98Vibration levelsVibration levels at handles, measured according to ANSIB175.3-1997, m/s2At idle, left/right handles, min.: 1,5/1,4 1,5/1,4At idle, left/right handles, max.: 2,0/1,8 2,4/2,2At max. speed, left/right handles, min.: 2,5/4,8 2,5/4,8At max. speed, left/right handles, max.: 4,9/8,0 5,8/7,6