English – 21TECHNICAL DATATechnical dataEngineCylinder capacity, cu. in/cm 3Cylinder bore, inch/mmStroke length, inch/mmRecommended max. speed, rpmMax. speed, should not be exceeded. rpmIdling speed, rpmSpeed of output axle, rpmMax. engine output, acc. to ISO 8893Ignition systemManufacturer/type of ignition systemSpark plugElectrode gap, inch/mmFuel lubrication systemManufacturer/type of carburettorFuel tank capacity, US pint/litresWeightWeight without fuel, cutting tool andguard, Lbs/kgNoise levelsEquivalent noise pressure level at the user’sear, measured according to prEN 31806and ISO 7917, dB(A), min/max:Equivalent noise power level at the user’sear, measured according to prEN 31806and ISO 10884, dB(A), min/max:Vibration levelsVibration levels on the handles, measuredaccording to prEN 31806 and ISO 7916,m/sWhen idling, left/right handles, min:When idling, left/right handles, max:At max. speed, left/right handles, min:At max. speed, left/right handles, max:225L/LD1,55/25,41,34/341,10/2811 000-12 00014 0002 70010 0000,9 kW/9 000 rpmWalbro MB/CDChampion RCJ 7Y0 02/0,5Walbro WT1,06/0,512,6/5,7 (LD 13,2/6,0)95/99104/1092,8/2,02,8/2,02,6/2,85,0/5,0232L1,88/30,81,38/351,26/3211 000-12 00014 0002 70010 0001,1 kW/8 400 rpmWalbro MB/CDChampion RCJ 7Y0 02/0,5Walbro WT1,06/0,513,2/6,092/100107/1102,5/2,34,0/3,03,8/2,76,8/3,4225L Lite1,55/25,41,34/341,10/2811 000-12 00014 0002 70010 0000,9 kW/9 000 rpmWalbro MB/CDChampion RCJ 7Y0 02/0,5Walbro WT1,06/0,512,4/5,695/99104/1096,1/3,86,1/3,83,0/8,04,0/10,0NOTE!Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.The table indicates the highest and lowest values.Approved accessoriesPlastic knifesTrimmer headTrimmer headTrimmer headTrimmer headEdger attachment (LD)Hedge trimmer attachment (LD)TypeTricut ∅ 300 mm.Trimmy H II, M10Trimmy Fix , M10Trimmy Hit Pro (USA)Superauto II∅ 200 mm.Length 580 mmCutting attachment guard Art No.503 74 50-01503 74 50-01503 74 50-01503 74 50-01503 74 50-01--