Husqvarna 1337PW Owner's Manual

Also see for 1337PW: Owner's manual

4Safety Rules• DO NOT tamper with governed speed.• DO NOT operate pressure washer above rated pressure.Excessively high or low operating speeds increase riskof injury and damage to pressure washer.CAUTIONWHEN ADJUSTING OR MAKING REPAIRS TO YOURPRESSURE WASHER• Disconnect spark plug wire from spark plug and place wirewhere it cannot contact spark plug.Unintentional sparking can result in fire orelectric shock.WARNING• DO NOT point spray gun at glass when in jet spray mode.• NEVER aim spray gun at plants.High pressure spray may damage fragile items includingglass.CAUTION• DO NOT wear loose clothing, jewelry or anything that maybe caught in the starter or other rotating parts.• Tie up long hair and remove jewelry.Starter and other rotating parts can entanglehands, hair, clothing, or accessories.WARNING• Always wear eye protection when using this equipment or invicinity of where equipment is in use.High pressure spray can cause paint chips orother particles to become airborne.WARNING• DO NOT secure spray gun in open position.• DO NOT leave spray gun unattended while machine isrunning.• NEVER use a spray gun which does not have a trigger lock ortrigger guard in place and in working order.• Always be certain spray gun, nozzles and accessories arecorrectly attached.A pressure washer produces a high pressure spraywhich increases risk of injury and damage to unit.CAUTION• If you have questions about intended use, ask your Husqvarnadealer or contact customer service at 1-877-224-0458.• NEVER operate units with broken or missing parts, orwithout protective housing or covers.• DO NOT by–pass any safety device on this machine.• Before starting pressure washer in cold weather, check allparts of the equipment to be sure ice has not formed there.• NEVER move machine by pulling on high pressure hose. Usehandle provided on unit.• Check fuel system for leaks or signs of deterioration, such aschafed or spongy hose, loose or missing clamps, or damagedtank or cap. Correct all defects before operating pressurewasher.• This equipment is designed to be used with Briggs & StrattonPower Products authorized parts only. If equipment is usedwith parts that DO NOT comply with minimum specifications,user assumes all risks and liabilities.Improper treatment of pressure washer can damage itand shorten its life.CAUTION• DO NOT touch hot surfaces.• Stay clear of exhaust gases.• Allow equipment to cool before touching.Running engines produce heat and hot exhaustgases. Temperature of muffler and nearby areascan reach or exceed 150°F (65°C).Fire or severe burns can occur.WARNING