Husqvarna 11 C Operator's Manual

Also see for 11 C: Workshop manual

14 – EnglishPRESENTATIONCutting unitRider 11 R has a cutting unit with rear ejection, i.e. clippingsare thrown behind the cutting unit.Rider 11 C, 13 C, 16 AWD and 16 C have a 3-blade Combi-unitThe Combi-unit, equipped with a BioClip-plug, finely chopsthe cuttings to fertiliser. Without the BioClip-plug the unitworks in the same way as a rear ejection unit.Lifting lever for the cutting unitThe lift lever is used to set the cutting unit in transport ormowing position.If the lever is pulled backwards the unit is raised and theblades automatically stop rotating (transport position).If the lock button is pressed in and the lever is moved forwardsthe unit will be lowered and the blades will automatically startto rotate (mowing position).The lever can also be used to temporarily regulate the cuttingheight, e.g. for a small mound in the lawn.Cutting height adjustment leverThe cutting height can be adjusted to 7 different positions withthe cutting height lever.Combi-unit 30-80 mm 1,18-3,15SeatThe seat has a jointed attachment on the front edge and canbe tipped forward.The seat can also be adjusted lengthways.Loosen the handles under the seat and adjust it forwards orbackwards to the desired position.FuellingThe engine runs on unleaded petrol with a minimum octanerating of 85 (not mixed with oil). We recommend the use ofbiodegradable alkylate petrol. Do not use petrol that containsmethanol.Do not fill the tank completely, leave an expansion area of atleast 2.5 cm (1“).! WARNING! Petrol is highly inflammable.Exercise care and refuel outdoors (seesafety instructions).IMPORTANT!Do not use the fuel tank as a support area.