Husqvarna 105 Operator's Manual

Also see for 315, 320: Operator's manual Operator's manual Quick guide Operator's manual Operator's manual

Contents

English - 13ENGLISHOperation selectionBy consecutively pressing the Operation selection button many times,one can choose between three different operation modes.• HOME. Sends the robotic lawnmower to the charging station. Itremains here until another operation mode is selected. The textHome is shown in the operation window. When the battery is fullycharged, the robotic lawnmower will remain parked in the chargingstation. The robotic lawnmower will first leave the charging stationand begin mowing again when the operation selection is altered toAUTO.The Home setting is also used after a new installation or whenchanges are made to an existing installation to test if the roboticlawnmower can follow the guide wire and dock with the chargingstation.• AUTO. The standard, automatic operation mode where the roboticlawnmower mows and charges automatically.• MAN. When mowing secondary areas the MAN setting must beused. If MAN is selected and the robotic lawnmower starts when itis out on the lawn, it will mow until the battery runs out. It will thenstop and the ’Needs manual charging’ message will appear. Therobotic lawnmower must then be moved manually to the chargingstation and then started manually after charging. If the roboticlawnmower charges in the MAN mode, it will fully charge, moveabout 20 cm / 8 ” out of the charging station and then stop. Thisindicates that it is charged and ready to start mowing.4.2 Control panel Automower®310/315/420/430X/440/450XWhen the stop button has been pressed and the hatch is opened, thestart page is displayed showing the following information:• Operating information, e.g. READY, MOWING, PARKED or TIMER.READY is displayed if the robotic lawnmower is not in any specificoperating mode, e.g. if the main switch has just been turned on.If the STOP button is pressed the robotic lawnmower displays whatit did prior to the stop, e.g. MOWING or SEARCHING.• Date and clock show the current time.• For Automower® 430X/450X: The satellite symbol is shown whenthe GPS-supported navigation is activated. Symbol (A) is shownwhen the robotic lawnmower has made contact with a sufficientnumber of GPS satellites. Symbol (B) shows when the roboticlawnmower has not made contact with a sufficient number of GPSsatellites. Symbol (A) blinks during the first days the robotic lawn-mower is working, as it is collecting GPS information about theinstallation.• The ECO symbol is displayed if the robotic lawnmower is set inECO mode.• The black clock symbol (A) is shown when the mower is not allowedto mow due to a timer setting. If the mower is not allowed to mow dueto Weather timer, symbol (B) is shown. If the operation mode Overr-ide timer is chosen, symbol (C) is shown.• The battery status shows the remaining battery charge. If the robo-tic lawnmower is loading, a flash is also shown over the batterysymbol (A). If the robotic lawnmower is placed in the charging sta-tion without charging, (B) is shown.• The height adjustment setting is displayed as a scale/numericalvalue.• The number of operating hours indicates the number of hourssince the day of manufacture that the robotic lawnmower has spentmowing or searching for the charging station.The keypad consists of six groups of buttons:• The START button is used to activate the robotic lawnmower. Thisis normally the last button to be pressed before closing the hatch.• The BACK and OK buttons are used to navigate in the menu. TheOK button is also used to confirm settings in the menu.• The arrow keys are used to navigate in the menu but also to makeselections in certain setting options.• The MENU button is used to go to the main menu.• The PARK button is used to send the robotic lawnmower to thecharging station.• Numbers are used to enter settings, for example, PIN code, timeor exit direction.Operation selection StartWhen the START button has been pressed the following operationselections can be selected:• MAIN AREA. The standard, automatic operating mode where therobotic lawnmower mows and charges continually.• SECONDARY AREA. is used when mowing secondary areaswhere the robotic lawnmower cannot travel to the charging stationautomatically.If the robotic lawnmower charges in the Secondary area mode, itwill fully charge, drive out about 50 cm / 20 ” and then stop. Thisindicates that it is charged and ready to start mowing.If the main working area has to be cut after charging, it is appro-priate to switch the operation selection to Main area before placingthe robotic lawnmower in the charging station.• OVERRIDE TIMER. Any timer settings made can be temporarilyoverridden by selecting Override timer. It is possible to override thetimer for 24 h or 3 days.• SPOT CUTTING (Not available for Automower® 310) means therobotic lawnmower will work in a spiral pattern in order to cut thegrass in the area where the grass has been mown less than inother parts of the garden.The Spot Cutting function is activated with the START button. Youcan select how the robotic lawnmower should continue to workonce mowing is finished by pressing Right Arrow and then specify-ing Main Area or Secondary Area.