303.2. Advanced OptionsTo change the detailed configuration, In the ‘Layout’ tab shown, Please click“Advanced…” shown on the bottom of the ‘Layout’ tab of the ‘Preferences’. Reset Default Values: Reset to default. Color Correction: You can correct gamma for colors. You need to useCardPrinterConfig to adjust color densities.- Main [-100:100] : Correct gamma for all panels- Yellow [-100:100] : Correct gamma for yellow panel- Magenta [-100:100] : Correct gamma for magenta panel- Cyan [-100:100] : Correct gamma for cyan panel- Black [-100:100] : Correct gamma for black panel- Overlay [-100:100] : Correct gamma for overlay panel Position Processing: Set criteria for resin black processing.- Color [-32:32]: to set the position of color panels- Mono [-32:32]: to set the position of resin or mono panel- Overlay [-32:32]: to set the position of overlay panel Resin Black(K) Processing: Set criteria for resin black processing.- Text [0:100]: to set density criteria for extracting black objects- Dot [0:100]: to set density criteria for extracting black dots- Threshold [0:100]: to set density criteria on dithering- Dithering Degree [0:100]: to set sharpness on dithering- Resin Extraction: You can set the method to extract resin black when you usedesign programs. It will be set automatically.
