Hawking USB 10/100 Mbps User Manual

Also see for HUF11: Specifications

Contents

Hawking USB 10/100 Mbps User Manual Manual pdf 5 page image

PACKAGE CONTENTS:One USB 10/100 Mbps Ethernet Adapter♦♦♦One Driver CDOne User’s ManualCheck to make sure that the unit was not damaged during shipping. If youencounter a problem, contact your dealer.CONNECTING THE HUF11Prior to hardware installation, make sure the USB port exists in your computerand is enabled. To check this, go to My ComputerÆ Control PanelÆ System.Select the Hardware tab and open the Device Manager tab. If the UniversalSerial Bus controller device is found, it means your USB port is installed andthe USB BIOS (Basic Input Output System) is enabled. If not, either no USB portis installed or the USB BIOS is not properly enabled. In this case, consult yourcomputer dealer for USB support.Follow the procedure below to install the USB Fast Ethernet Adapter.1. Locate the USB host port on your Notebook or desktop PC. Align andinsert the HUF11 to the USB host port. Push it evenly and steadilyuntil it is seated.2. Connects the Fast Ethernet Adapter to the HUB with the LAN cable,also known as the RJ-45 connector.3. Then, Windows will prompt you to install the Driver.- 2 -