English13OPERATION– Connect to the power source (220-240V AC, 50Hz) with the power cord andplug.– Rotate the switch knob (7) to desired air flow. “1” indicates low speed, “2”indicates medium speed, “3” indicates high speed and “0” indicates offposition.– Push the oscillating knob (6) for oscillation and pull the oscillating knob for fixedposition.– The airflow can be adjusted upward or downward by simply moving the motorhousing up or down.Cleaning– Always turn off and disconnect the power cord from the socket before carryingout any cleaning operation.– Warning ! After assembly, never remove the guards for cleaning or maintenancepurpose.– Use a moistened cloth (NOT WET) to remove the dirt from the plastic and metalsurfaces.– Never immerse the fan in water or any other liquid.– If the fan is not used for a long periods, protect with suitable cover aftercleaning , then store in a dry place.