Hasselblad XPan II User Manual

Also see for XPAN II: User manual Instruction manual User manual

Hasselblad XPan II User Manual Manual pdf 24 page image

Film plane indexThe film plane index is situated on the top plate of thecamera to the left of the flash hot shoe. This providesthe most accurate mark for distance measurementfrom the subject.Self Timer1. Set the main selector dial to the icon as in the il-lustration.242. The icon and set delay time appears in thecamLCD panel.3. Set delay time can be changed (2s or 10s) with theup/down buttons on the camLCD panel.4. Press the shutter release button.5. When delay time is set to 10s, the self-timer lamp,located on the front of the camera to the right ofthe viewfinder window, lights up for seven secondsand flashes for three seconds as a countdown indi-cation. When delay time is set to 2s the self-timerlamp start flashing immediately after release.6. The shutter will then fire and the film will advance.Even if the self-timer operation has started, you canstop it simply by turning the mode switch back to S, Cor OFF.When set in the automatic mode, do not stand in front of thecamera when pressing the release button as this couldadversely affect the exposure reading.The exposure reading is fixed at the time of pressing theshutter release button, even in AE mode. Check, therefore,to see that there has been no change in the lightingconditions during the delay time before exposure.Multi exposureThe camera can be programmed to make up to 9 expo-sures of the same frame.Not For Resale – Free Download at http://www.joe-chan.com/manuals1. To select multi exposure mode push the MODEbutton on the camLCD for 1s. Push repeatedly untila flashing double frame symbol appears on thedisplay.2. Select multi exposure with the ▲ / ▼ buttons toselect a non-flashing double frame symbol. Confirmthe setting by pushing the release button halfway anda double frame symbol is shown on the camLCD.3. By pushing the ▲ button repeatedly you can nowselect up to 9 exposures, displayed on the expLCD.You can any time cancel the multi exposure functionby pushing the MODE button. Multi exposure cannotbe combined with Auto-bracketing.