Menu
Harken Hoister SUP Manual
Also see for SUP: Manual
            | |
7808: 45 lb (20 kg) SystemSUPSUPSAVE TIME! READ THE ENTIRE MANUAL BEFORE BEGINNING HOISTER INSTALLATION.Harken, Inc. • N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974 • Tel: 262-691-3320 • Fax: 262-701-5780 • Email: hoister@hoister.com • Web: www.hoister.comIMPORTANT SAFETY INFORMATION• NEVER USE TO LIFT A PERSON.• DISABLE AUTOMATIC GARAGE DOOR OPENERwhen installing, raising, or lowering Hoister.• READ ENTIRE MANUAL CAREFULLY BEFOREstarting installation. It will save you time.• DO NOT UNTIE ANY ROPESSystem comes ready to install.Leave F, G and H together.• DO NOT RAISE OR LOWER HOISTERwith anyone standing under object.Welded screw eyeHCP1443Pigtail lag screwsHCP1444Drop black ropesHCP1447/HCP1448Rope Organizer ComponentsWARNING! Strictly follow all instructions to avoid an accident, damage to property,personal injury or death. See www.harken.com/manuals for additional safety information.WARNING! This product is not to be used for human suspension. Components may failcausing person to fall, possibly resulting in serious injury or death.DO NOT UNTIEDO NOT UNTIE(G1) Cleat7758ASSY224ATOOLSDrill Plumb line Safety glassesDrill bits: 5/32" (4 mm)7/32" (6 mm)5/16" (8 mmPencil Tape measureStud finder Wrench (box end orratcheting) 7/16" (11 mm)StepladderBPulleys224ADAShackle072CHLag boltsHFS908I Organizer platesH-28375AKWashersHFS913JOrganizer pulleysH-52010LWebbing straps with bucklesHCP1459.SETESingle black/red hoisting ropeHCP1483FBlock and tackle*GKIT INCLUDESA 1 Welded screw eyeB 4 Pigtail lag screwsC 1 ShackleD 4 PulleysE 2 Webbing straps with buckles7' (2.13 m)F 1 Single black/red hoisting ropeG 1 Block and tackle withcleat (G1) and ropeH 4 Black drop ropes: 2 long, 2 shortI 4 Lag bolts 1/4" x 21/2" (6 x 63 mm)J 4 Washers 1/4" (6 mmK 2 Organizer platesL 2 Organizer pulleysPURCHASE SEPARATELY IF NEEDED –See “Note” Step 1b1 Pine board (riser) (grade 2)2" x 6" x 7" (50 mm x 152 mmx 180 mm) Not used for raftersrunning sideways2 Pine boards (grade 2) 2" x 6" x 6'(50 mm x 152 mm x 1.83 m)8 Lag bolts and washers 5/16" x 4"(8 x 100 mm)PURCHASE ADDITIONAL FOR RAFTERSRUNNING SIDEWAYS – See Step 2A1 Pine board (grade 2) 2" x 4" x 6'(50 mm x 100 mm x 1.83 m)2 Lag bolts and washers 5/16" x 31/2"(8 mm x 90 mm) |
Related manuals for Harken Hoister SUP
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved