Menu
Harbor Freight Tools 97092 Set Up And Operating Instructions Manual
    | |
Contents | 
HigH REACH ROPECHAin sAwModel 97092sEt uP And OPERAting instRuCtiOnsDiagrams within this manual may not be drawn proportionally.Due to continuing improvements, actual product may differ slightly from the product described herein.distributed exclusively by Harbor Freight tools®.3491 Mission Oaks Blvd., Camarillo, CA 93011Visit our website at: http://www.harborfreight.comRead this material before using this product.Failure to do so can result in serious injury.sAVE tHis MAnuAl.Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion ofthis manual or any artwork contained herein may be reproduced in any shapeor form without the express written consent of Harbor Freight Tools.For technical questions or replacement parts, please call 1-800-444-3353.Keep this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures. Write the product’s serial numberin the back of the manual near the assembly diagram (or month and year of purchase ifproduct has no number). Keep this manual and the receipt in a safe and dry place forfuture reference.general safety RuleswARning! Read all instructionsFailure to follow all instructions listed below may result in serious injury.Keep work area clean and well lit.1. Cluttered or dark areas invite accidents.Keep children and bystanders away while operating a Chain saw.2. Distrac-tions can cause you to lose control.Stay alert, watch what you are doing and use common sense when operating a3.Chain Saw. Do not use this product while you are tired or under the influenceof drugs, alcohol or medication. A moment of inattention while operating ChainSaws may result in serious personal injury.use safety equipment. Always wear eye protection.4. Safety equipmentsuch as dust mask, non-skid safety shoes, ANSI approved hard hat, fullface shield, and work gloves should be used for appropriate conditions toreduce personal injuries. |
Related manuals for Harbor Freight Tools 97092
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved