Menu
Harbor Freight Tools 94515 Assembly Instructions Manual
                  | |
Page 14SKU 94515 for technical questions, please call 1-800-444-3353.installing the transparent panelsPanel Clips (46) are used to secure the Transparent Panels in place on the Green-1.house.Remove the protective film from both sides of all panels.2.3663/6563 63353215a/15b653. The Roof Panels (63) and the Roof Window Panels (65) will need to be placed asshown in the illustrations above. The top edges of these panels need to be placedup under the edge of the Crown (35) or the Window Support Beam (15a/15b).One at a time, place each Transparent Panel (62–70) in its proper location on the4.Ceiling, Frame, and Door of the Greenhouse. Then, secure the Transparent Panelin place, using the quantity and location of Panel Clips (46) as shown in the PanelInstallation Diagram, next page. Also, refer to the panel clip installation instructionsin step 6.If the Door Top/Bottom Panel (70) does not fit properly, turn it 90° and try refitting5.it.ATransparentPanelFrameMemberPanelClip (46)B C6. be careful, panel clip (46) ends may be sharp and may spring back!To attach Panel Clips:Place the two loose ends of the Clip into the groove in the frame.a.Swing the center portion of the Clip up against the panel.b.Two edges of the Clip swing under the edge of the panel and the center edgec.holds the panel in place. |
Related manuals for Harbor Freight Tools 94515
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved