Harbor Freight Tools 93675 Assembly And Operating Instructions Manual

Contents

Harbor Freight Tools 93675 Assembly And Operating Instructions Manual Manual pdf 11 page image

Page 11SKU 93675 For technical questions, please call 1-800-444-3353OPERATING INSTRUCTIONSControlsCutting StockWarning! Always wear ANSI-approved safety impact eye goggles and gloves when op-erating the Band Saw.1. Unplug the Band Saw Power Cord (45) from the electrical outlet.2. Verify that the Saw Blade (49) tension is correct. (Refer to Blade Tension Adjustmenton the following page.)3. Set the cutting angle of the Saw Blade by first loosening the two Angle Set Bolts (44),then carefully pivoting the Band Saw assembly to the desired angle as read on theScale (65).The Scale (65) is marked in one degree increments from 0° (cut 90° to stock) to 45° cutto stock.Handle (56)Power Switch (66)Trigger Micro Switch (60)Blade Tension Knob (47)ViseStock Stop Pin (87) Angle Set Bolts (44)Vise LockBlade Guide ArmAdjustment Bolt (44)Body Cover (4)(44)(65)(87)