Hantek 2D82Auto Manual

Hantek 2D82Auto Manual Manual pdf 1 page image

1GETTING START①Total Menu:Press this button to enter the total menu, you can choose Vehicle Diagnosis,Oscilloscope, AWG, DMM, and language switching.②Confirm button:When setting the source parameter, after entering the character, press the button toconfirm.③ Automatically setting button:It automatically adjust the horizontal and vertical scales of the oscilloscopeautomatically and set the trigger coupling, type, position, slope, level and mode,etc., to acquire a stable waveform display.④ Zoom and move keys:In the trigger menu, the left and down keys push the trigger level down, and the rightand upper direction keys push the trigger level up;In the channel menu, the upper and lower direction keys change the zero levelposition of the channel, and the left and right direction keys change the volt/div ofthe channel;In the time base menu, the upper and lower direction keys change the time/div, andthe left and right direction keys change the horizontal trigger position;In DMM, switch measurement function;In generator, after choosing a parameter, the left and lower direction key will reducethe parameter value, the right and up direction key will increase the parametervalue; it is also used for the digital selection of the virtual keyboard.⑤Stop and Run:In scope, stop or run the waveform acquisition;In DMM, hold the measuring data or update data;In generator, turn on or off the waveform output.GETTING START

/ 3

Related manuals for Hantek 2D82Auto