Hanna Instruments HI83300 Instruction Manual

Contents

Hanna Instruments HI83300 Instruction Manual Manual pdf 28 page image

28 PROBE MODE 7.4. pH MEASUREMENT MESSAGES / WARNINGSNo Probe:No probe is connected or the probe is broken.Connecting:The meter has detected a probe and is reading the probeconfiguration and calibration information.Incompatible Probe:The connected probe is not compatible with this device.Incompatible Calibration:The probe’s current calibration is not compatible with thismeter. The calibration must be cleared to use this probe.Exceeded Probe Range:The pH and/or temperature measurement exceed thespecifications of the probe. The affected measurement value(s)will be flashing.Broken Temperature Sensor:The temperature sensor inside the probe is broken.Temperature compensation will revert to a fixed value of25 °C (77 °C).Cal Due:The probe has no calibration. See section Probe Calibration.