Hanna Instruments HI 9200/9 Instruction Manual

Hanna Instruments HI 9200/9 Instruction Manual Manual pdf 1 page image

HI 9200/9 Infrared Transmitter with 1 m (3’) cable and9-pin serial connectorHI 9200/25 Infrared Transmitter with 1 m (3’) cable and25-pin serial connectorOPERATIONUsing the HI 9200 Infrared Transmitter, all recorded datacan be fed to your Personal Computer without having toconnect and disconnect cables between your meter andcomputer. This ensures that there is no wear and tear onyour computer. Simply attach the transmitter connector toyour PC and tighten the screws. The transmitter can then beleft permanently connected to your PC to facilitate wirelessdata transmission.Place your data-logger on the HI 9200 Infrared Transmitterensuring that the infrared LED’s are aligned and placedright on top of each other. Press the meter down gently toHI 9200Infrared TransmitterHI 9200Infrared Transmittersecure a perfect contact between the infrared LED’s.For downloading to your PC, follow attentively the stepsspecified in the instruction manual of your datalogger.During the data transfer the meter dis-plays "r232".Data can be further elaborated with thenew (optional) HI 92000 Windows® compatible applicationsoftware.

/ 2

Related manuals for Hanna Instruments HI 9200