Hanna Instruments Checktemp series Instruction Manual

Contents

specifications

Hanna Instruments Checktemp series Instruction Manual Manual pdf 1 page image

Instruction ManualChecktempPocket-sizedThermometerswith Cal-Check®SPECIFICATIONSRange -50.0 to 150.0°C-58.0 to 302.0°FResolution 0.1°C / 0.1°FAccuracy ±0.3°C (-20 to 90°C)±0.5°C (outside)±0.5°F (-4 to 194°F)±1°F (outside)Typical EMC Deviation±0.3°C / ±0.5°FEnvironment 0 to 50ºC (32 to 122ºF);RH max 95%Battery Type 1 x 1.5V alkalineBattery Life approx. 3000 hoursof continuous useDimensions 66 x 50 x 25 mm(2.6 x 2 x 1")Weight 50 g (1.8 oz.)WARRANTYThis meter is warranted for one year against defects inworkmanship and materials when used for its intendedpurpose and maintained according to instructions.This warranty is limited to repair or replacement free ofcharge. Damages due to accident, misuse, tampering orlack of prescribed maintenance are not covered.If service is required, contact the dealer from whom youpurchased the instrument. If under warranty, report themodel number, date of purchase, serial number and thenature of the failure. If the repair is not covered by thewarranty, you will be notified of the charges incurred.If the instrument is to be returned to Hanna Instruments,first obtain a Returned Goods Authorization Number fromthe Customer Service department and then send it withshipment costs prepaid.When shipping any instrument, make sure it is properlypackaged for complete protection.Recommendations for UsersBefore using this product, make sure that it is entirely suit-able for the environment in which it is used. Operation ofthis instrument in residential areas could cause unaccept-able interferences to radio and TV equipment. Any varia-tion introduced by the user to the supplied equipment maydegrade the instrument’s EMC performance. To avoid elec-trical shock, do not use these instruments when voltages atthe measurement surface exceed 24 VAC or 60 VDC.To avoid damages or burns, do not perform any measure-ment in microwave ovens.w w w . h a n n a i n s t . c o mAVAILABLE MODELSHI 98501 ChecktempC(°C reading)and HI 98502 ChecktempF(°F read-ing) are provided with a stainless-steel penetration probe.HI 98505 ChecktempLC(°C reading)and HI 98502 ChecktempLF(°F read-ing) are provided with a stainless-steel probe for liquid measurement.

/ 2

Related manuals for Hanna Instruments Checktemp series