Haneco SKYLUX Evo Series Installation Manual

Haneco SKYLUX Evo Series Installation Manual Manual pdf 1 page image

Product Code: SKYLUX150W-EVSKYLUX200W-EVSKYLUXEVOLast updated 14/05/24For more informationwww.haneco.com.au1300 001 LEDThank you for choosing Haneco SKYLUX EVO Highbay.We strongly recommend that you read this manual carefully before installation.This installation guide is suitable for SKYLUX EVO model.• Installation must be carried out by a licenced electrician and in accordancewith these instructions and relevant Australian standards and local regulations.• Ensure input voltage conforms within product specifications.• Ensure wires are securely connected.• Before switching on, ensure all wires are correctly connected.• The warranty is void if product is not installed according to the instructions.Note: Product technical information and specification may change over time without priornotice. For latest information, please contact our customer service or visit our websitewww.haneco.com.auWARNINGProduct SpecificationPRODUCT CODE POWER CCT VOLTAGE/FREQUENCYIK/IPRATINGOPERATINGTEMPERATURE220-240Vac50/60HzIK08IP65 -35 - 50°CSKYLUX150W-EVSKYLUX200W-EV100/120/150W5000K100/150/170/200W1. Ensure main power supply is switched off before commencing the installation.2. Remove the IP65 cover to access the power switch. Push inward and turn counterclockwise to remove the IP65 cover as shown inthe figure below.3. Set the desired power.4. Ensure to install the IP65 cover.5. Screw the eye bolt on top of the luminaire.6. Install optional accessories and desired mounting setting.7. Install the luminaire onto the desired location.InstallationMounting OptionCeiling or wall mount with bracketNot Included (available as accessories)Ceiling mounting with hookMounting bracket holes

/ 2

Related manuals for Haneco SKYLUX Evo Series