Chapter 8 Page 203Selecting the conduits for a wireless HotSync operationThe Conduit Setup dialog box on your communicator enables you to define which files and/orapplications synchronize during a wireless HotSync operation. You can use these settings tominimize the time required for wireless synchronization.To change the Conduit Setup for a wireless HotSync operation:1. Press Option and then press Menu to access the Applications Launcher.2. Tap the HotSync icon .3. Press Menu .4. Under Options, select Conduit Setup (/D).5. Tap the check boxes to deselect the files and applications that you do not want to synchronizeduring a wireless HotSync operation. The default setting is to synchronize all files.Note: Applications that do not have a database (such as games) do not synchronize — evenif you select the item in the Conduit Setup dialog box.6. Hold Option and press Return to finish.Performing a wireless HotSync operationAfter you prepare your computer and your communicator, and select your Conduit Setup options,you are ready to perform a wireless HotSync operation.To perform a wireless HotSync operation:1. Press Option and then press Menu to access the Applications Launcher.2. Tap the HotSync icon .3. Tap the Modem icon to dial the desktop modem and synchronize the applications.4. Wait for the HotSync operation to finish. If you have any problems conducting a successfulHotSync operation, see Appendix B.
