BariVestSystemRoMedicTMManual no: 00779 En Ver. 4 110310BariVest is a lift vest that has been design as an aid to gait training for patients weighing 180 kg or more. It can be usedwith both mobile and stationary lifts, with a four-point slingbar or with BariTurn. BariVest features a back section, a frontsection and a narrower section in the middle to enable comfortable fit in the crotch area. It has two slingbar loops, bothfront and back, as well as belts at three levels.SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for differenttypes of lifting and for patients with different needs. The slings are available in several different materials and sizes. Allmodels are safe and very easy to use. The choice of model and material depends on the patient’s needs and the transfersituation.Visual and mechanical inspectionCheck the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure thatseams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the deviceand check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must bediscarded.Always read the manuals for all assistive devices used during a transfer.Keep the manual where it is accessible to users of the product.Do not leave the patient unattended during a transfer situation.To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling’sback loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.The lowest allowable safe working load always determines the safe working load of the assembled system. Alwayscheck the safe working loads for the lift and accessories before use. Contact your dealer if you have any questions.Functional inspectionAlways read the manualManual - EnglishSWL: 570 kg/1250 lbs