Hall Research Technologies U97-ULTRA User Manual

Contents

Hall Research Technologies U97-ULTRA User Manual Manual pdf 14 page image

Model U97-ULTRA14Receiver Audio Output Connector, DB15 – FemaleIf a serial communication is needed, connect a PC’s serial port to RS232, a DB9 maleconnector3. Configuration & Operation3.1 Sender Front Panel Controls and indicatorsKeep the VIDEO ADJUST switch in RUN mode for normal operation. Set it to CAL(calibrate) mode to adjust the video at the remote unit per the following descriptions3.2 Receiver Front Panel Controls and indicatorsThe Console Extender-Remote unit can be operated in two different modes, which arerun-mode and calibrate-mode.In the run-mode, all LEDs and buttons for video adjust are off.In the calibrate-mode, the unit should turn on the specific video adjust LEDs to indicatethe previous selection in this mode, such as channel selection A or B, HF Gain or Alignmode.