Hakko Electronics FT-8004 Manual

Also see for FT-8004: Instruction manual Manual

Hakko Electronics FT-8004 Manual Manual pdf 1 page image

THERMAL WIRE STRIPPERFT-8004(with holder part)● PACKING LIST AND PART NAMESPlease make sure that all items listed below are included in the package.Thank you for purchasing HAKKO products.When using the product, please read this manualand follow the instruction to change the parts.2019.6MA03051XZ190607HAKKO FT-8004 ...................................1Holder part (for use with C5012) ...........1SEMS screw P2 (M3×6 for holder part) ... 2Hexagon wrench (1.27 mm) ..................1Instruction Manual ................................1Hexagon socket set screw (M2.5×2.5) ....2PACKING LISTPrecautions Regarding Electrostatic ProtectionCAUTIONThis product includes features such as electrically conductive plastic parts andgrounding of the handle and station as measures to protect the device to besoldered from the effects of static electricity.Be sure to observe the following instructions:⿟ The handle and other plastic parts are not insulators, they are conductors. Whenreplacing parts or repairing, take sufficient care not to expose live electrical parts ordamage insulation materials.⿟ Be sure to ground the unit during use.HandleHAKKO FT-8004Blade (not included)Hexagon wrenchHexagon socket set screwInstruction ManualLead adjusterTHERMAL WIRE STRIPPERFT-802SEMS screw P2Holder partOVERSEAS AFFILIATESU.S.A.: AMERICAN HAKKO PRODUCTS, INC.TEL: (661) 294-0090 FAX: (661) 294-0096Toll Free (800)88-HAKKO4 2 5 5 6http://www.hakkousa.comHONG KONG: HAKKO DEVELOPMENT CO., LTD.TEL: 2811-5588 FAX: 2590-0217http://www.hakko.com.cnE-mail:info@hakko.com.hkSINGAPORE: HAKKO PRODUCTS PTE., LTD.TEL: 6748-2277 FAX: 6744-0033http://www.hakko.com.sgE-mail:sales@hakko.com.sgPlease access to the following address for the other Sales affiliates.http://www.hakko.comHEAD OFFICE4-5, Shiokusa 2-chome, Naniwa-ku, Osaka 556-0024 JAPANTEL:+81-6-6561-3225 FAX:+81-6-6561-8466http://www.hakko.com E-mail:sales@hakko.com© 2018-2019 HAKKO Corporation. All Rights Reserved.Company and product names are trademarks or registeredtrademarks of their respective companies.WARNINGIf output setting is over 70%, the handpiece and holder can be very hot. Please besure to turn on the auto-sleep function before use.(On HAKKO FT-801, please be sure to connect the station and holder with includedconnecting cable in order for auto-sleep to function properly.)WARNINGOperating above 80% output setting can cause stress to the heating element andshorten the life of the blades. Use 80% and above power only when necessary.When not using the handle, be sure to place it in the holder.CAUTIONSince the blades will become hot, place the handle on the handle holder when it isnot being used.

/ 2

Related manuals for Hakko Electronics FT-8004