Haier XQSB60-JN User Manual

Also see for XQSB60-JN: User manual

Contents

Haier XQSB60-JN User Manual Manual pdf 9 page image

7Connection between the water inlet hose and the washerDismantle the water inlet hoseConnection between the jointer of the water inlet hoseand the water inlet hoseCheck the connection between the jointer of the water inlet hoseand the water faucet1.Do not take off the water absorption cushion. Please check if thecushion is dropped or damaged before each usage. If it happensplease contact our after-sale department immediately.1.Swing the hose gently to confirm if it is fastened stable.2.After installation, open the faucet to check if it leaks.3.Do not bend the hose with overstrain.1.Push down the slider. Insert the water inlet hose into the jointer.2 Hang the lock lever to the jointer. Release the slider till a clicksound is heard.Locking leverSliderwater absorptioncushion.nut of the waterinlet hosejointer of thewater inlet valvethe jointer of thewater inlet hoseSliderLocking lever1. Close the water faucet.2. Press the locking lever. Push down the slider. Then pull of the water inlethose.If the machine is used frequently, the jointer of the water inlet hose can bekept on the faucet to prevent damaging the fixing screw.2 Put the nut of the water inlet hose on the valve jointer.3 Fasten the nut. Swing it gently to confirm if it's suitable.4.Before each usage please check if the connectionbetween the jointer of the water inlet hose and thewater faucet, and the installation of the water inlethose are firm, so as to prevent dropping fromimproper installation position.