Power Button:• Push the button in to have your washer "ON". The light will turn on indi-cating that power is "ON". Push the button out to have your washer"OFF". The light will go off indicating that power is "OFF".Load Rinse Level Selector Button:• Push the button in if you want to reduce water usage during the rinsecycle. Push the button out if you want maximum water usage during therinse cycle.Note: Half=Minimum Water RinseFull=Maximum Water RinseSpin Cycle Selector Button:• If you want to extract more water from your clothes during the wash cycle,push the button out. Clothes will be drier when this option is selected.• If you do not want to extract water from your clothes using the spin cycle,push the button in. If this option is selected, only the excess water in the tubwill drain leaving the clothes wet.Advantages of Non-Spin Cycle:• The spin cycle may cause excessive creasing and wrinkling in some fabrics.• High speed spin might be too strong for delicate garments. It could result instretching or excessive wear.Note: When the spin cycle is in the OFF position, the machine will notautomatically go to the spin dry function.7EnglishUnderstanding Your "Front Load" WasherThis style of washer is gentler on your laundry because it has a tumble wash actionand there is no agitator to damage your clothes. Since there is no agitator in thisstyle of washer, the washer runs quietly. This style of washer is designed to save youmoney. It uses less water and detergent to clean your laundry.OPERATIONSOnOffPowerHalfFullLoadOnOffSpinXQG65-11SU -MANUAL 10/29/02 1:50 PM Page 9