OFF OFFMAXOFFOFFWashing sequenceFigure 1Figure 2Figure 3Figure 4Figure 5WOOLWOOLWOOLSpin timerSPIN TIMERSPINWASHWash timerWASH TIMERWASH TIMERDRAINSTRONGSTANDARDWASH SELECTORWash selector Buzzer Water-filling entrance(To set to below 2 minute,first set to 5 minute thenturn it back. it can increasethe service life of the timer).LINENLINENUsing processUsing process(standard current,strong current) (The buzzer will ring whenthe washing finishes) (to set to below 1 minute,first set to 2 minute thenturn it back. it can increasethe service life of the timer).Water-filling selectorWashSILKSILKSILKCOTTONCOTTONDRAINDRAINSTRONGSTRONGSTANDARDSTANDARDWASH SELECTORWASH SELECTOR1.Water-filling selectorSet the water inlet selector at the "WASH" side.(Figure 1)2. Fill the water and add the dissolved washingpowder to make the water level reach the presetposition. (Figure 2)Run washing program for some time to stir anddissolve the powder completely.3.Put in the laundries. If the water quantity isinsufficient, please add water.4.Select the current.Select the strength of the current according tothe laundries. (Figure 3)5.Select the washing timeSelect the washing time according to the laundries.(Figure 4)6.After washing, the buzzer will ring. Set the "WASHSELECTOR" at "DRAIN". (Figure 5).BUZZERXPB90-99GS