Haier XPB70-111S User Manual

Also see for XPB70-111S: User manual

Contents

Haier XPB70-111S User Manual Manual pdf 16 page image

14Wipe the complete unit with softcloth twisted dry.Wipe with neutral detergent if too dirtyDo not wash it directly by waterCleaning the overflow filter2. Take off the corrugation pipe.Dismantle the upper part of thecorrugation pipe inside theoverflow filter ( as indicated inFigure 1).3. Cleaning the overflow filterClean the lint around the filterand flush with tap water.4. Install the overflow filter.(1).Install the corrugation pipe.(2).Insert the mounting plate atthe bottom of the filter intothe valve cover.(3).Hang up the hook at the leftupper side.(4).Push the upper part in asindicated in Figure 2.CorrugationPipeHookFigure 1Figure 2Water leveladjusting leverAfter washing, dismount the water inlethose.Do not store water in the tub for longperiod. Discharge the water immediatelyafter each using.Pull off the power plug and hang up thepower cord.Hang up the drain hose.Wipe off the water drops on the surfaceand inside the tub with clean soft cloth.Open the cover of the wash tub and theinner/outer cover of the spin tub forsome time (about one hour), then closethem.Disposal of the complete unitThinnerAlcohol Petrol

/ 19

Related manuals for Haier XPB70-111S