Haier XPB50-AS User Manual

Also see for XPB50-AS: User manual

Contents

Haier XPB50-AS User Manual Manual pdf 11 page image

OFFOFFOFFOFFDRAINSTRONGSOFTMAXWashing sequenceFigure 1Figure 2Figure 3Figure 4Figure 5WOOL WOOLWOOLSpin timerSPIN TIMERSPINWASHWash timerWASH TIMERWASH TIMERWASH SELECTORWash selector BuzzerBUZZERWater-filling entrance(To set to below 2 minute,first set to 5 minute thenturn it back. it can increasethe service life of the timer).LINENLINENUsing processUsing process(Soft current,strong current) (The buzzer will ring whenthe washing finishes) (to set to below 1 minute,first set to 2 minute thenturn it back. it can increasethe service life of the timer).Overfilling signWater-filling selector handleWashSILK SILKSILKCOTTONCOTTONDRAINDRAINSTRONGSTRONGSOFTSOFTWASH SELECTORWASH SELECTOR1.Water-filling selector(1) Set the water-filling selector at the "WASH" side.(Figure 1)(2) Set the water level adjusting lever to needed line.2. Fill the water and add the dissolved washingpowder to make the water level reach the presetposition. (Figure 2)Run washing program for some time to stir anddissolve the powder completely.3.Put in the laundries. If the water quantity isinsufficient, please add water.4.Select the current.Select the strength of the current according tothe laundries. (Figure 3)5.Select the washing timeSelect the washing time according to the laundries.(Figure 4)6.After washing, the buzzer will ring. Set the "WASHSELECTOR" at "DRAIN". (Figure 5).