Haier WM6602AJ User Manual

Contents

Haier WM6602AJ User Manual Manual pdf 18 page image

(If there's breakdown, please pull off the power plug before checking) The followingphenomena are not breakdowns sometimes. Please confirm again before sending it torepair. If there are real breakdowns, please come to the special maintenance department orafter-sale service department of our company. Do not repair it by yourself.Phenomena The reason How to settleThe top lid is not closedIs the drain hose put down?Is the drain hose blocked byforeign material?Are the laundries put slantingly?Are the laundries slanting inspinning?Is the machine slanting?Is the machine slanting?The water tap is not openThe water inlet valve is blockedThe water pressure is too lowand the current is too smallIs there power failure?Is the power plug loose?Is the jointer screw of the waterinlet hose is loose or twistedawry?The water faucet leaksThere's abnormal sound inside themachineThe machine doesnot actClose the top lidPut down the drain hose. Openand close the top lid once.Clean the foreign material.Open and close the top lid once.Re-order the laundries. Closethe top lid.Level the machine in rightposition. Open and close thetop lid once.Open the water tap. Push the"Start/Pause" button.Clean the water inlet valve.Push the "Start/Pause" button.Wait for the normal waterpressure before use.Use it when the power is on.Insert the power plug tightly.Level the machine properly.Re-order the laundries.Fasten the jointer screwproperly.Trouble shooting Answer to questionDoes the water level arrive at theset water level? Affusion to the set water level.Is the power plug loose? Insert the power plug tightly.Is the top lid closed? Close the top lidAre the laundries put orderly? Put the laundries orderly.Not spinNot washBuzzing upon reservation starts,Nixie tube indicates "E0"Safety switch actuates, notspin, (after self-correctiontwice), nixie tube displays"E3", buzzingNo or slow water filling (notreaching the level in 15 min),nixie tube indicates "E4",buzzingNo or slow drain, nixie tubeindicates "E1" , buzzing.If the nozzle is choked withforeign bodiesRemove the foreign bodiesPoor or no waterfall flowThe top cover leaves open Close the top lidRunning pauses during spin,nixie tube indicates "E2",buzzing

/ 20

Related manuals for Haier WM6602AJ