Haier WM6002A User Manual

Contents

Haier WM6002A User Manual Manual pdf 16 page image

Push the "START/PAUSE"button5 Close the lid 6 Finish washingAfter Finishing washalarm automaticallyAfter finishing wash it'll alarm automaticallyAs the top lid opened ,the Washer will automatically give an alarmand stop running , exclusively during supplying water and rinsing.Using processUsing process* Total time: including the normal water inlet time and drain time. The total washing time may be influenced bythe water inlet pressure and water level.* Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayedon spin digitron is from intermittent spinning to the moment before inertia spinning; the time displayed on thetime remain digitron is the total remaining time)* In soaking, after water inlet it will perform soaking for about 10-40 minutes, then perform washing, rinsing andspinning.* In selecting "pasthaste" program, the washing machine will set the complete procedures of water levelselector, washing, rinsing and spinning automatically.Push the "RESERVE" button to select suitable reserve wash programSTARTPAUSEAfter switching on the power, the reserve program is set to off mode automatically. If you need to set the washingprocedure to be finished at reserved time, please push the " reserve " button to set the reserve wash program.Refer to reserve button in Page 11 for selectionWhen the "RESERVE " function is activated, the indicator light of the program you haveset will be off. The "reserve (hours later)" and "time remain (minutes) " indicator lights willbe on. During reserve procedure, push the "reserve" button to display the reserve mode.To change the running program or cancel the reserve setting, youneed to switch off the power and make new selection. the washing will be finished after 18 hours.Confirm the operation of reserve programRESERVEPageTime remianed(minutes)Reserve(hours later)