Haier LT22R3CBW User Manual

Haier LT22R3CBW User Manual Manual pdf 15 page image

Menu Operations3.Press button to increase and decrease the level to match your preference .4. Repeat step 2 and step 3 until desired picture quality has been achieved ./Functions:Video Mode: Press to set the picture mode .Contrast : Used to set the contrast balance of the picture.Brightness : Used to set the brightness level of the picture.Colour : Press to adjust the colour saturation of the picture.Sharpness : By increasing the level, it will show cleaner and clearer imagesand by decreasing the level, it will make picture smoother.Tint(Only available in NTSC): Set the colour tone of the picture.Colour Temperature : Press to select the colour temperature from Normal/Cool/Warm .Noise Reduction: Adjust the quality of the picture by selecting Off,Low,Middle,High.PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK buttonto enter the submenu. Press to adjust the value.///Picture Menu OptionsPicture quality can be adjusted for any input separately .The picture quality on the screen can be adjusted as follows:1. Press MENU button and until the picture menu appears on the screen.2. Press button to enter the picture menu and go up and down to selectthe desired option .//NOTE: Using your remote control to navigate in the on-screen menus.The on-screen menus shown in this manual may be different from those on your TV. Theseare example to illustrate your TVs operation.EXIT MENU OKPICTUREAuto SyncH.PositionV.PositionSizePhase5050500