Haier HWM-802P User Manual

Contents

Haier HWM-802P User Manual Manual pdf 10 page image

STANDARDSTANDARDSTRONGSTRONGDRAINDRAINWashing sequenceWashFigure 5Figure 42. Fill the water and add the dissolved washingpowder to make the water level reach the presetposition. (Figure 2)Run washing program for some time to stir anddissolve the powder completely.3.Put in the laundries. If the water quantity isinsufficient, please add water.4.Select the current.Select the strength of the current according tothe laundries. (Figure 3)5.Select the washing timeSelect the washing time according to thelaundries. (Figure 4)6.After washing,the buzzer will ring .Setthe "WASH SELECTOR" at "DRAIN".(Figure 5).Figure 3Figure 28WASH TIMERWASH TIMERWash timer(To set to below 2 minute,first set to 5 minute thenturn it back. it can increasethe service life of the timer).OFF1296315WASH SELECTORWASH SELECTORWash selector(Strong current,standard current)STANDARDSTANDARDSTRONGSTRONGDRAINDRAINSPIN TIMERSPIN TIMERSpin timer(to set to below 1 minute,first set to 2 minute thenturn it back. it can increasethe service life of the timer).14325OFFOFFOFFOFF1296315STANDARDSTANDARDSTRONGDRAINDRAIN1 Inlet selector(1) Set inlet selector to Wash side. Figure 1(2 )Adjust water level rod to a position as needed. INLET SELECTORWASH SPIN Figure 1